Defiant DFI-5936-BK Instruction Manual download pdf (Page 5)

5 HOMEDEPOT.COM

Please contact 1-866-308-3976 for further assistance.

Installation

Determining the mounting

location

NOTE: The light xture should be mounted approximately

8 ft. (2.4 m) above the ground.

Ƒ Determine the mounting location – wall mount

only.

Ƒ Position the lamp heads (A) in the general

direction of the desired light coverage.

Wall Mount

Removing the mounting plate

NOTE: This xture comes with a mounting plate (D). It is

pre-assembled on the light xture (B) for shipping.

Ƒ Unscrew the two decorative screws (CC)

connecting the light xture (B) to the mounting

plate (D) and remove the mounting plate (D)

using the pull loop.

Installing the mounting bracket

WARNING: Turn the power off at the circuit breaker or

fuse. Place tape over the circuit breaker switch and verify

power is off at the light xture.

NOTE: Four mounting bracket screws of various sizes are

included. The installation will only require two. Discard the

unused mounting bracket screws after installation.

Ƒ Remove the existing light xture.

Ƒ Install the mounting bracket (FF) using the

mounting bracket screws (AA or BB) that best

t the junction box.

Ƒ Firmly pull on the mounting bracket to verify

it is securely mounted to the junction box. If

necessary, use the screws that were removed

from the existing light xture.

AA or BB

1 2 3 4 5 6 7 8 9 10 ... 23 24

No comments

Defiant DFI-5936-BK Instruction Manual Page 5